Here's a pair of 50lb (each) OEM Toro Wheelhorse rear wheel weights that fit (Craftsman, John Deere, Cub Cadet, Toro, Wheelhorse, and other) lawn and garden tractors with 12" rear wheels.
Bolt them on and increase traction for mowing, towing, and snow moving.
These weights are no wider than the diameter of the steel wheel. They do not hang over the edge of the rim and over the tire sidewall.
Plastic housings are factory filled with ferrocrete and have a relief for the tire's valve stem. In good condition with minor cracks in the plastic housing of one weight that does not matter.
You'll need to buy 2 long 1/2" bolts, washers, and nuts for each wheel weight or get a length of 1/2" all-thread and cut it down.
Both weights for $50 plus $26 for Priority Mail Flat Rate shipping in the US only.
Prepayment by US Postal money order only... no paypal.
Email... subeluvrATnetzeroDOTcom after you fix the email address
Bolt them on and increase traction for mowing, towing, and snow moving.
These weights are no wider than the diameter of the steel wheel. They do not hang over the edge of the rim and over the tire sidewall.
Plastic housings are factory filled with ferrocrete and have a relief for the tire's valve stem. In good condition with minor cracks in the plastic housing of one weight that does not matter.
You'll need to buy 2 long 1/2" bolts, washers, and nuts for each wheel weight or get a length of 1/2" all-thread and cut it down.
Both weights for $50 plus $26 for Priority Mail Flat Rate shipping in the US only.
Prepayment by US Postal money order only... no paypal.
Email... subeluvrATnetzeroDOTcom after you fix the email address