I read through all of the plow discussions - and looked at all the pictures, but I could not find an answer to this question.

So I got a 48 inch plow
79350 with a ser number in the 890000's

It came off of a 520 and I have a 312.

I am trading a member the extender bar for the 520 for the rear mounting brackets. The toro schematic looks like this:

https://lookup3.toro.com/partdex/index.cfm?...1&partsviewer=1

but the plow I bought looks like this:

http://whtractor.15.forumer.com/index.php?showtopic=1212

there are 2 beams - both welded on mine and in the pic that are not on the schematics. I can move the bar that attaches the lift bar so it will fit mine, but...

can he just put the extender on his and it will mount to a 520 - or are we going to have to trade frames also?

Also, will my blade adjustment handle be in the right place?

Just wondering

If the plows are both in good shape why not just trade plows ? everyone gets what they need, just a thought.

that's what we were debating - but we are 5 hrs apart.

Never Mind - I figured it out. The extension for the 520 is 2 parts. The bracket on the end of the plow and the T shaped bar in the middle.